Products
GATES
Chainlink Fencing Company mani:Jfacturers gates in a very wide range. These include Single Leaf Personnel Gates, Double Leaf Vehicle Access Gates, Sliding Gates, Ornamental Gates,Chainlink lnfilled Gates, Fabricated-infill gates etc.
Chainlink infill gates are made to match chainlink fence system. These gates are made to Omanian and BS1722 standards.
MATERIALS
MAIN FRAME
50x50, 65x65, 75x75 angles or 60.3mm, 76.1mm or 88.9mm Medium or Heavy Galvanised Circular Holow Sections. Sizes depend on requirements.
BRACES
Will be angles 45x45, 50x50 or 65x65 OR
48.3mm, 60.3mm, 76.1mm Medium or Heavy Galvanised Circular
Hollow sections.
CHAINLINK INFILL
ACCESSORIES
Include Hinges, Drop bolts, Draw bolts, Stretcher bars and fasteners.
GATE POSTS
Are made from Heavy duty Circular Hollow Sections of diameter
88.9mm, 114.3mm or 165.1mm.
HEIGHTS & WIDTHS
Will be as per requirement.
Generally Single Leaf Personnel gates will be 1.2M wide in 1.8M, 2.0, 2.4M heights.
Vehicle Access gates will be Double Leaf Gates in 4M, 5M, 6M or 9M width in 1.8M, 2.0M, 2.4M, 2.9M heights.
FINISH
GRADE -AThe sections are Galvanised and Epoxy Polyurethane coated to 200 microns.
GRADE -BThe sections are Galvanised to BS729.
GRADE -CThe sections are Epoxy Polyurethane coated on wash primered, abraded bare surfaces in green colour, in 3 coats or Polyester powder coated in green or approved colour.
Any other type, colour or design can also be undertaken.
to view more picture , please skip this page to gallery