Essential for prestressing the fence. Available in Rolls of G.l. and P.V.C. Coated
G.l. wires to BS4102. Size should be selected one size higher than chainlink mesh
except in heavy guages where mesh and Tension wires will be the same.
Required for fastening Tension wires and Barbed wires to post. Available in Rolls
of 2.5mm G.l. or 2.5/3.5mm P.V.C. Coated G.l. wires. Mandatory requirement.
Required for tying fence to tension wires. Avai lable either as rolls of wire or precut lengths in 2.0mm G.l. wire or 1.8/2.6mm P.V.C. Coated G.l. wires. Mandatory
Made from Galvanised and/or Epoxy coated 25x5 flat bars with holes for fixing with Barbed wire lines. Used as antibunching device on Barbed lines between posts. Optional requirement
Made from Galvanised and/or Epoxy coated 25x5 flat bars with holes for fixing.to Strainer posts. Essential for stretching the chainlink fabric taut. Mandatory
Galvanised straining device in M6 and M8 sizes. Required for tensioning Tension and Barbed wires at tension posts. Requirement mandatory but selection optional among alternate straining devices
Galvan1sed straining device M10 size 1n lengths of 150mm, 200mm or 250mm with twin nuts and washers. Used for tensioning tension wires and barbed wires at Tension posts. Requirement mandatory but selection optional among alternate straining devices.
SHORT& LONG WINDERS
Galvanised straining devices used for tensioning tension wires at Tension posts.
Made from 38x3 flats and M25 binding bolts. Requirer11ent optional.
Used for concrete posts made of Galvanised 50x50 or 75x75 angle 50mm wide,
meant for holding Stretcher bars. Requirement mandatory for Concrete posts.
Galvanised M8x25, M8x40 fasteners for fixing braces, Stretcher bars and other devices. Requirement mandatory.
to view more picture , please skip this page to gallery